Key Information
-
Coverage 12m2/L
-
Drying Time Touch Dry 1-3 Hours Recoat 5 to 6 hours under normal conditions (In damp or humid conditions drying time may be lengthened)
-
Coats 1
Product Features
- ONE COAT
Product Description
Ultra Kote Oil Base Undercoat is a smooth matt undercoat specially formulated to meet economical needs.
Application Description
Apply 1 coat of Ultra Kote Oil Base Undercoat and 2 coats of Ultra Kote Enamel Gloss.
Use Brush/Roller/Spray
Health & safety
Hazard warnings
Dangerous for the environment. In the event of an accident contain and collect spillage using sand or earth. Avoid contact with skin or eyes. Wear eye/hand protection
Tips & Advice
Preparing the Surfaces
Surfaces generally must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc. Previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off. Steel metal surfaces should be manually prepared by power or hand tool to Australian Standards AS1627.4 Class 2.
Cleaning
Clean all equipment with Mineral Turpentine immediately after use.
Storing
Keep container lip closed and in an upright position. Store in a cool shaded place.
