Finish Semi Gloss
Drying Time 1-2 hours Recoat Allow 4 hours in cold or humid areas
- WATER BASED
- LOW ODOUR
Health & safety
Tips & Advice
Preparing the Surfaces
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer.
Clean all equipment with clean water immediately after use.
Keep container lip closed and in an upright position. Store in a cool shaded place.