No Colour Selected

Ultra Kote Interior Flat Acrylic

Change Colour
Select a Colour
Size
Paint Calculator
This product is currently unavailable online. Please visit your nearest store.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage 10-11m2/L
  • Drying Time Touch Dry 1-2 hours Recoat Allow 4 hours in cold or humid areas
  • Coats 2
Product Features
  • LOW ODOUR
  • HIDES IMPERFECTIONS

Product Description

Ultra-Kote Interior Flat Acrylic is a mid-tier quality emulsion with good opacity that gives a smooth matt finish.

Application Description

Apply 1 coat of Ultra Coat Acylic Sealer Undercoat and 2 coats of Ultra Kote Interior Flat Acrylic with a brush/roller; leave 1-2 hours between coats.

Health & Safety

Keep out of the reach of children. Use suitable personal protection equipment. Do not use empty container for storing food. In case of contact with eyes rinse immediately with lots of water. In case of contact with skin wash immediately with soap and water.
Download Adobe Reader
  • Ultra-Kote Interior Flat Acrylic.pdf
  • Ultra-Kote Interior Flat...docx.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below).
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
  • 3. Storing
    Keep container lip closed and in an upright position. Store in a cool shaded place.

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.