Ultra Kote Gloss Enamel
Mid Tier selection coating suitable for both interior and exterior walls
Ultra Kote Gloss Enamel is a mid-tier solvent-based high gloss finish that when dried provides a smooth mirror like finish.
Apply 1 coat of Ultra Coat Oil Based Undercoat and 2 coats of Ultra Kote Gloss Enamel with a brush/roller; leave 5-6 hours between coats.
Dangerous for the environment. In the event of an accident contain and collect spillage using sand or earth. Avoid contact with skin or eyes. Wear eye/hand protection
New Surfaces generally must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc. Previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off. Steel surfaces should be manually prepared by power or hand tool to BS 7079 Part A1 : 1989 St3. For optimum performance new galvanized and aluminium surfaces should be cleaned and degreased, then pre-treated with an appropriate pre-treatment primer to ensure good adhesion.
Clean all equipment with Mineral Turpentine immediately after use.
Keep container lip closed and in an upright position. Store in a cool shaded place.
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again