

Key Information
-
Coverage 10.5-11.05m2/L
-
Drying Time Touch Dry Dependant on temperature and humidity. Recoat 1-2 hours. Allow 4 hours in cold or humid areas
-
Coats 1
Product Features
- QUICK DRYING
- LOW ODOUR
Product Description
Ultra Kote Acrylic Sealer Undercoat is a good quality, water-based sealer
Application Description
Apply 1 coat of Ultra Coat Acrylic Sealer Undercoat and 2 coats of either Ultra Kote Exterior Gloss Acrylic
Ultra-Kote Interior Semi-Gloss Acrylic
with a brush/roller/spray; leave 1-2 hours between coats.
Health & safety
Keep out of the reach of children. Use suitable personal protection equipment. Do not use empty container for storing food. In case of contact with eyes rinse immediately with lots of water. In case of contact with skin wash immediately with soap and water.
Tips & Advice
Preparing the Surfaces
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. Treat areas affected by mould, fungi or algae with Sugar Soap. If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below.
Cleaning
Clean all equipment with clean water immediately after use.
Storing
Keep container lip closed and in an upright position. Store in a cool shaded place.