Sunproof Max Low Sheen

Woodhaven
Size
Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Low sheen
  • Coverage 11-12m2/L
  • Drying Time Touch Dry
    30 minutes
    Recoat
    2 hours at 25°C (Allow 4 hours in cold or humid areas.)

  • Coats 2
Product Features
  • UV RESISTANT
  • WATER BASED
  • LONG LASTING

Product Description

A durable self-priming Low sheen acrylic providing maximum protection for exterior surfaces. No primer or undercoat required for timber, masonry, cement brick & galvanised iron.

Application Description

Apply 1 coat of Taubmans 3in1 and 2 coats of Sunprood Max Low Sheen with a brush/roller; leave 2 hours.

Health & Safety

Keep out of the reach of children. Use suitable personal protection equipment. Do not use empty container for storing food. In case of contact with eyes rinse immediately with lots of water. In case of contact with skin wash immediately with soap and water.
  • Sunproof Max Low Sheen.pdf
  • Sunproof Max Low Sheen MSDS.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    New Work
    Surfaces must be sound, clean, dry and free from grease, wax or any loose material that prevents good adhesion. Rub down using a suitable abrasive paper and dust off.
    For masonry surface, the relative humidity should be under 17% according to Protimeter or let the substrate dry from 21-28 days in normal conditions (average temperature 30°C, humidity of environment is about 80%)

    Previously Painted Surface
    Remove all loose and flaking paint by scraping or sanding previously painted areas and sand smooth. Surface must be free of any loose material that prevents good adhesion. If mould is present, treat with suitable fungicidal wash or diluted bleach and rinse with clean water. Allow to dry before painting.

    For Galvanised Steel Surface
    Degrease new galvanised steel and abrade structural galv to remove chemical treatments to ensure maximum adhesion.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
  • 3. Storing
    Keep container lip closed and in an upright position. Store in a cool shaded place.