Drying Time Touch Dry 6 hours under normal conditions. Recoat 6-7 hours under normal conditions.
- ONE COAT
Health & safety
Tips & Advice
Preparing the Surfaces
Surfaces generally must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc. Previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off. Steel surfaces should be manually prepared by power or hand tool. For optimum performance new galvanized and aluminium surfaces should be cleaned and degreased, then pre-treated with an appropriate pre- treatment primer to ensure good adhesion.
Clean all equipment with Mineral turpentine immediately after use
Keep container lip closed and in an upright position. Store in a cool shaded place.
Do you know the area?
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 1 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again