Good to see you!
Or by email
Welcome to Taubmans
Or by email
Terms and Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
Would you spare a minute to answer 3 questions
We will use this to provide you with useful information.
Thanks!
We will send you colourful news every now and then.

Prep Right 3 in 1
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Coverage 9-10m2/L
-
Drying Time Touch Dry 30 minutes Recoat 2 hours under normal conditions (In damp or humid conditions drying time may be lengthened)
-
Coats 1
-
WATER BASED
-
LOW ODOUR
Product Description
Taubmans 3-IN-1 is high performance water based all-purpose primer, sealer and undercoat with outstanding hiding, filling and sanding properties suitable for use on both Interior/ Exterior surfaces. Taubmans 3-IN-1 is rapid drying with fast recoat and features “no mess” application- reducing masking and clean-up.
Application Description
Apply one coat using a brush or roller. Keep brushes and roller working freely by occasionally rinsing in water. A 10mm regular nap cover or similar will give best results.
Health & Safety
Keep out of the reach of children. Use suitable personal protection equipment. Do not use empty container for storing food. In case of contact with eyes rinse immediately with lots of water. In case of contact with skin wash immediately with soap and water.
- Prep Right 3 in 1 Primer.pdf
- Taubmans Prep Right 3-IN-1 Primer.pdf
Tips & Advice
-
1. Preparing the SurfacesSurface preparation for New Work: Surfaces must be clean and dry before painting. Dust down bare wallboards and interior timber. New concrete and cement render must be allowed to cure for 28 days before painting. Weathered timber must be sanded back to a sound surface. Repaint Remove all loose and flaking paint. Sand to feather edges before painting. Remove surface chalk and powder, dirt, oil and grease. Spot bare areas with Taubmans 3-in-1 before applying a full coat. Do not use 3-in-1 on set plaster, fibrous plaster or plaster glass.
-
2. CleaningClean all equipment with clean water immediately after use.
-
3. StoringKeep container lip closed and in an upright position. Store in a cool shaded place.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).


Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.