Good to see you!
Otherwise login by email.
Welcome to Taubmans
Otherwise login by email.
Terms and Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
Thanks!
We will send you colourful news every now and then.

Easy Coat Low Sheen
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Low sheen
-
Coverage 13m2/L
-
Drying Time 2 Hours
-
Coats 2
-
WASHABLE
-
HIGH COLOUR DURABILITY
-
LOW ODOUR
-
LONG LASTING
-
WATER BASED
Product Description
A premium quality highly durable and washable finish.
Application Description
Apply 1 coat of Taubmans 3in1 and 2 coats of Easycoat Flat with either a brush/roller or spray; leave 1-2 hours between coats. Allow 4 hours in cold or humid areas
Health & Safety
Keep out of the reach of children. Use suitable personal protection equipment. Do not use empty container for storing food. In case of contact with eyes rinse immediately with lots of water. In case of contact with skin wash immediately with soap and water.
- tds__taubmans_easy_coat_low_sheen.pdf
- Easy coat low sheen.pdf
Tips & Advice
-
1. Preparing the SurfacesSurfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. Treat areas affected by fungi or algae with fungicidal wash. If surfaces remain powdery or suffer from alkali attack after thorough preparation, seal with one coat of an appropriate sealer.
-
2. CleaningClean all equipment with clean water immediately after use.
-
3. StoringKeep container lip closed and in an upright position. Store in a cool shaded place.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).


Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.