Finish Low sheen
Drying Time 2 Hours
- HIGH COLOUR DURABILITY
- LOW ODOUR
- LONG LASTING
- WATER BASED
Tips & Advice
Preparing the Surfaces
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. Treat areas affected by fungi or algae with fungicidal wash. If surfaces remain powdery or suffer from alkali attack after thorough preparation, seal with one coat of an appropriate sealer.
Clean all equipment with clean water immediately after use.
Keep container lip closed and in an upright position. Store in a cool shaded place.
Do you know the area?
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again