Easy Coat Flat

    Pink Buff
    Change Colour
    Size
    Paint Calculator
    Find a Store
    Your Measurements:
    Amount Needed:
    For the best result we recommend to use {coatAmount} for {productTitle}
    Key information
    • Finish Matt
    • Coverage 10-11m2/L
    • Drying Time Touch Dry
      1-2 hours
      Recoat
      Allow 4 hours in cold or humid areas
    • Coats 2
    Product Features
    • WASHABLE
    • LOW ODOUR
    • HIDES IMPERFECTIONS
    • HIGH COLOUR DURABILITY
    • WATER BASED

    Product Description

    Taubmans Easycoat Flat is a premium quality flat washable paint that is ideal for ceilings or areas which have imperfections.

    Application Description

    Apply 1 coat of Taubmans 3in1 and 2 coats of Easycoat Flat with either a brush/roller or spray; leave 1-2 hours between coats. Allow 4 hours in cold or humid areas

    Health & Safety

    Keep out of the reach of children. Use suitable personal protection equipment. Do not use empty container for storing food. In case of contact with eyes rinse immediately with lots of water. In case of contact with skin wash immediately with soap and water.
    Download Adobe Reader
    • Easycoat Flat.pdf
    • Easycoat Flat.pdf

    Tips & Advice

    • 1. Preparing the Surfaces
      Surfaces must be sound, clean, dry and free from all defective or poorly
      adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below).
    • 2. Cleaning
      Clean all equipment with clean water immediately after use.
    • 3. Storing
      Keep container lip closed and in an upright position. Store in a cool shaded place.

    How much paint do I need?

    Measure your dimensions

    Do you know the area?

    Enter your measurements

    Paintable area

    {{!-- The value will be injected with JavaScript --}}
    {{!-- The value will be injected with JavaScript --}}
    m²

    Measure the height and length of the surface you want to paint (in metres or centimetres).

    Your Measurements:

    {{!-- This value will be injected with JavaScript --}}

    Amount needed:

    {{!-- This value will be injected with JavaScript --}}

    This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.