Easy Coat Flat
Elegant finish that is ideal for hiding minor surface imperfections
Taubmans Easycoat Flat is a premium quality flat washable paint that is ideal for ceilings or areas which have imperfections.
Apply 1 coat of Taubmans 3in1 and 2 coats of Easycoat Flat with either a brush/roller or spray; leave 1-2 hours between coats. Allow 4 hours in cold or humid areas
Keep out of the reach of children. Use suitable personal protection equipment. Do not use empty container for storing food. In case of contact with eyes rinse immediately with lots of water. In case of contact with skin wash immediately with soap and water.
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below).
Clean all equipment with clean water immediately after use.
Keep container lip closed and in an upright position. Store in a cool shaded place.
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again