Easy Coat Doors & Trims Satin Enamel

Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Satin
  • Coverage 14m2/L
  • Drying Time 5-6 hours under normal conditions (In damp or humid conditions drying time may be lengthened)
  • Coats 2
Product Features

Product Description

A premium quality, Satin Interior enamel that provides a long lasting finish.

Application Description

For WOOD surface apply Prep right Traditional Undercoat and 2 COATS of Easycoat Door & Trim Satin Enamel. METAL surface apply 1 COAT of Prepright Grey Green Primer and 1UNDERCOAT of Prepright Traditional Undercoat and two coats of Easycoat Door & Trim Satin Enamel. Apply using brush & roller

Health & Safety

Dangerous for the environment. In the event of an accident contain and collect spillage using sand or earth. Avoid contact with skin or eyes. Wear eye/hand protection
  • Easy Coat Door & Trim Satin Enamel.pdf
  • Easycoat Door and Trim Satin Enamel.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    New Surface
    Surfaces generally must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc.

    Previously Painted Surface
    Previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off.

    Galvanised Metal Surfaces
    Steel surfaces should be manually prepared by power or hand tool to BS 7079 Part A1:1989 St3. For optimum performance new galvanized and aluminum surfaces should be cleaned and degreased, then pre-treated with an appropriate pre- treatment primer to ensure good adhesion
  • 2. Cleaning
    Clean all equipment with Mineral Turpentine immediately after use
  • 3. Storing
    Keep container lip closed and in an upright position. Store in a cool shaded place.