- LONG LASTING PROTECTION
- MIRROR FINISH
Health & safety
Tips & Advice
Preparing the Surfaces
New Surface Surfaces generally must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc. Previously Painted Surface Previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off. Galvanised Metal Surfaces Steel surfaces should be manually prepared by power or hand tool to BS 7079 Part A1:1989 St3. For optimum performance new galvanized and aluminum surfaces should be cleaned and degreased, then pre-treated with an appropriate pre- treatment primer to ensure good adhesion
Do you know the area?
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again