Good to see you!
Or by email
Welcome to Taubmans
Or by email
Terms and Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
Would you spare a minute to answer 3 questions
We will use this to provide you with useful information.
Thanks!
We will send you colourful news every now and then.

Clear Proof Interior Gloss
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Gloss
-
Coverage 14m2/L
-
Drying Time Touch Dry 1-2Hours Recoat 3 hours under normal conditions (In damp or humid conditions drying time may be lengthened)
-
Coats 3
-
STAIN RESISTANT
Product Description
Taubmans Clearproof Interior Gloss varnish is a solvent based wood finish
Application Description
Apply 1 coat of Clear Proof Primer Sealer Undercoat and 2 coats of Clear Poof Interior Gloss with a brush; leave 3 hours between coats.
Health & Safety
Dangerous for the environment. In the event of an accident contain and collect spillage using sand or earth. Avoid contact with skin or eyes. Wear eye/hand protection
- Clear Proof Interior Gloss.pdf
- clear Proof Interior Gloss.pdf
Tips & Advice
-
1. Preparing the SurfacesSurfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease wax etc. All surfaces should be thoroughly rubbed down in the direction of the grain, using a suitable abrasive paper and then dusted off.
-
2. CleaningClean all equipment with Mineral turpentine immediately after use.
-
3. StoringKeep container lip closed and in an upright position. Store in a cool shaded place.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).


Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.