Drying Time Touch Dry 1-2Hours Recoat 3 hours under normal conditions (In damp or humid conditions drying time may be lengthened)
- LONG LASTING PROTECTION
- UV RESISTANT
Tips & Advice
Preparing the Surfaces
Surfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease wax etc. All surfaces should be thoroughly rubbed down in the direction of the grain, using a suitable abrasive paper and then dusted off.
Clean all equipment with Mineral turpentine immediately after use.
Keep container lip closed and in an upright position. Store in a cool shaded place.