- WATER BASED
- LOW ODOUR
Tips & Advice
Preparing the Surfaces
Surface preparation for New Work: Surfaces must be clean and dry before painting. Dust down bare wallboards and interior timber. New concrete and cement render must be allowed to cure for 28 days before painting. Weathered timber must be sanded back to a sound surface. Repaint Remove all loose and flaking paint. Sand to feather edges before painting. Remove surface chalk and powder, dirt, oil and grease. Spot bare areas with Taubmans 3-in-1 before applying a full coat. Do not use 3-in-1 on set plaster, fibrous plaster or plaster glass.
Do you know the area?
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 1 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again