Key Information
-
Finish Gloss
-
Coverage 14m2/L
-
Drying Time Touch Dry 1-2 Hours Recoat 5-6 hours under normal conditions (In damp or humid conditions drying time may be lengthened)
-
Coats 2
Product Features
- MIRROR FINISH
- LONG LASTING PROTECTION
Product Description
A premium solvent-based high gloss finish that when dried provides a smooth mirror like finish. It is a hard wearing finish that can be applied on both interior and exterior surfaces.
Application Description
For WOOD surface apply Prep right Traditional Undercoat and 2 COATS of
Easycoat Door & Trim Gloss Enamel
METAL surface apply 1 COAT of Prepright Grey Green Primer and 1UNDERCOAT of
Prepright Traditional Undercoat and two coats of Easycoat Door & Trim Gloss Enamel
Apply using brush & roller
Health & safety
Hazard warnings
Dangerous for the environment. In the event of an accident contain and collect spillage using sand or earth. Avoid contact with skin or eyes. Wear eye/hand protection
Tips & Advice
Preparing the Surfaces
New Surface Surfaces generally must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc. New galvanized and aluminum surfaces should be cleaned and degreased, then pre-treated with an appropriate pre-treatment primer to ensure good adhesion. Previously Painted Surfaces Surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off. Steel surfaces should be manually prepared by power or hand tool. For optimum performance
Cleaning
Clean all equipment with Mineral Turpentine immediately after use
Storing
Keep container lip closed and in an upright position. Store in a cool shaded place.
